Xiaomi is preparing to launch two “Redmi” flagship in China. Redmi’s 80 Ultra and Redmi Pad. The company is preparing formal details for both, but we have already separated the lawyers and reviewed the smartphone. Now they have done the same with the mini tablet.
The Redmi pad will have 8.8 “IPSLCD, which supports dolby vision, which decides through the label (and dolby atmos for the speaker). The screen has a 3,008 x 1,880px resolution (16:10), 165 Hz refresh rate and DC reduction.
Redmi Pad: 8.8 “165 Heritz with IPSL CD Dolby Vision
The tablet has a UNBAD Metal Design with Sand Blasted Finish. This scales indicate 336 grams and measures 6.46 mm thick – this tablet is about performance in a highly portable form factor.
Redmi pad weighs 336 grams and it is 6.46 mm thick
Talking about this, the tablet dimensions 9400+, as well as the LPDDr5x RAM and UFS 4.1 storage. In the test, the chip set performed impressively and the cooling proved to be better than many tablets, even larger than the pad.
Xiaomi used a large 12,050 mm fever fever chamber to get off the chip seat and throw it into the metal frame. Interestingly, the Vapor Chamber is made of aluminum alloy instead of traditional copper to save weight. There is some foam recruitment that will catch the internal in case of fall.
Redmeglass Tablet 3 Pro (SD8 Elite) (Image Source) Size of Redmi Pad (D9400+)
The Mother Board is placed with the center of the bullet, which helps to divide the heat evenly. The battery is divided into two cells on both sides and there are speakers (with atmosphere) along with each cell.
The combined capacity of two cells of the battery is 7,500mAh – a 3,505mAh (13.78Wh) and the other is slightly larger in 3,995mAh (15.71WH). A 67W charger box is included, though the tablet has pulls a maximum of 55W and requires 61 minutes for 1 % to 100 % charge. Bypass charging is supported.
Internal of Redmi’s Pad
The USB-C port is located on the Mother Board and is wired for USB 3.2 General 1 speed (5GBPS). It supports the display port. There are two cameras on the tablet – a 13MP module in the back (OV13b 1/3.06 “)) and an 8MP One on the front (OV08F, 1/4”). There is no fingerprint reader on the board.
Here is the full restraint and review video of the Redmi pad from Vicheyom:
Source
