The RedMajg is a mid -season upgrade of 10 SS Pro 10 Pro. This phone arrived as one of the first Snapdragon 8 Elite devices last year and was the first red magic to use liquid metal to improve cooling. The company has had time to improve its setup since then.
The “well -known version” of Snapdragon 8 Elite is now available, which surrounds CPU and GPU. The two prime cores of Orion are now running at 4.47GHz, which has six performance covers, more than 4.32GHz on the original model. Also, Adreno 830 GPU now runs from 1.1GHz to 1.2GHz.
At night, moonli and evening in the Redmagk 10s Pro
There are also other changes – RAM (up to 24GB) is now LPDR 5T, which should be offered more than Bandothth of LPDR 5 X used in 10 Pro. Storage is up to 1TB of UFS 4.1 Pro.
Efficiency
We tested the Red Magic 10s Pro with and without his cool fan and without it to find out how much difference it makes. Let’s look at the first performance – note that the fan doesn’t really work much for peak performance, it is mostly about permanent performance, which is emerging in the next chapter.
With the coming of the Prime CPU Core, the 10s Pro -Pro has surpassed 10 Pro in the Gack Bench Single Threaded Test and the Snapdragon is ahead of a packet of 8 elite and dimensions 9400 power phones. However, once the two prime cores have to share the power budget with six performance core, things with the original model also end. There are still applications that work heavily threaded, they should see a small collision. Custom apps and sports will not be a great benefit.
GPU Oraklock has a huge impact on gaming and helped the 10s supporter open the lead on competitive devices in the extreme benchmarks of wildlife. It will translate sports into high FPS, which was not hitting a more stable gameplay in refresh rate and sports.
Surprisingly, the Radmagical Solar Bay Test, Three Mark’s Ray Traising Benchmark does not work so well on the mark. The 10s Post Post Posts Posts on a higher score than 10 Pro, but neither Snapdragon can be met with 8 elite and dimensions 9400 phones.
Antoto is an entire system test, so it tests additional ingredients like RAM and storage bandut. The 10s shows a small but notable improvement than 10 Pro 10 Pro.
Establishment
With the original 10 Pro, Red Magic added liquid metal – it is an alloy metal that melts at a very low temperature and thermal conductivity is high. This gaming is used in PC and laptops as it performs better than a common thermal compound.
The Red Magic 10 SS Pro is 36 mm of liquid metal in direct contact with the chip (10 % more than 10 Pro). It guides heat to a 12,000 mm vapor chamber, which spreads heat around. But the phone doesn’t just rely on the passive cooling – this can happen, but the gaming you can enable fans of 23,000 RPMs.
Red Magic 10s Pro’s cooling setup
This fan is useless in the cool air from the outside, pulls it over the phone over the chasset and now throws warm air from the other side. In our Red Magic 10 Pro Review, we noted that this system was not as effective as it has been in the previous generations. Let’s see if the 10S Pro works better cooling system.
Unfortunately, the CPU is still a lot of throttle – up to 56 % of the peak with the fan, 54 % of the fan off (57 % and 54 % respectively on 10 Pro). However, the fans smooth some clashes in the chart.
CPU Stability Tests: Fan of • Fan On
It is not better to move the GPU and the results. The stability reported by the 3D mark in the Wildlife External Test is in the margin of error, as is the performance – both the best and the lowest score from the test.
GPU Stability Test: Fan of • Fan On
Does the fan actually do something? This really happens – here’s a look through a thermal camera showing the phone down the load. You can see that the phone is hot air that heat the desk below (the camera itself cannot see the air, of course).
RedMajk 10s Pro in thermal vision
Radmagk 10 SS Pro is a very fast phone. Performance is not a problem. However, the active cooling system does not benefit so much to justify the additional costs and complications (such as basic water resistance) associated with it.
