Why can you trust the Tech Radar
We spend hours in testing every product or service that we review, so you can be sure you are buying the best. Learn more about how we test.
Peak Design Pro Tripai: Two -minute Review
Peak design tripods have unique design features. There is a leg design, which is not a tubing but it has a six -sided cross section, which has the inner edge that fits straight against the center column, which does not matter. The center column is mostly thin, but it also contains a six -sided cross section for the feet. It seems that the construction of the non -hose gives extraordinary hardship to both the legs and the center column.
The second unique feature is a low -profile hair head with no spreading locking nut. Instead, it wrapped up with a rotating collar, and another, releases the top lock and compact Arc Swiss compatible camera plate.
This low profile head design means that the original peak design travel triple does not need to rotate 180 degrees from its pair position before using its legs. The low height of the hair head means that you can easily fold the feet and pack it without a complex manor.
The features of these design have made the original peak design traps very different from anything. Now the peak design has taken the same design concepts and has shielded them into a pro -design manufactured design of professional use.
In fact, a pro tripod is not three. Regular Pro Tripai is the one I spent most of the time with this review, but I also had to try the Pro Light and Pro Light and Pro Light. Pro Light regular Pro tripod has almost the same height and pair length, but it has a light construction for easily portability. The tall version has long parts and can even reach the surface of the eye for long people without any center column expansion – it exceeds my eye level!
The new pro tripod is not much bigger and more important than the original travel tripod – they have a new pro -ball head that is bigger and more sufficient than the original, as well as a clean ‘vomiting’ design so that the ax is not below it. This means that you can equalize the pan axis to pan the shots and panoramas without rotating with the length of the legs. This is not a huge range of adjustments but it may be needed.
More highly pan axis adjustment, or if you have a lot of work video, you have covered you. There are two new ‘modes’ to go with these tripods: a tilt head for video work, and the other one leveling bowl that you change with a standard center column, and which regularly has a head -connected screw so that you can use your favorite video head if you want.
I like the original peak design travel troupe, so does the new pro tripod impress me so much? Yes! It is to literally, such as the use of a scale up version of Travel Tripai. Carbon fiber legs feel as smooth and warm, the clamps of the legs are just as sharp and positive, and since these pro tripods have four legs instead of five, they are a little faster to set up.
The new Pro is terrific. It is huge and sticky, it makes tight locks and when you pack, it does not fully increase the height of the tripod. Like before, there are no stretching nobes or lever to go on the way.
The use of the peak design of the rotating collar to lock the QR plate makes it a bit. There are two collar near the head and at first it may be a struggle to remember what he does and how he works.
The new Pro Head, though, feels exactly the stone, and it is with the pan and the bent mode that it really becomes smart. All you need to do is remove the regular Arc Swiss plate and slot in the pan and turn on the appropriate fluid pan and the ADD aid.
There is a expansive panning handle that stands against the head of the head through a magnet (peak design magnet) and can be quickly corrupted in the use of the ready ready -made head. It looks like a cluded, in which one head is riding on the other, but it’s not at all. It looks like it is made to work like this, and it feels like it. The tilt axis, anyway, is sprouting, so if you use a long camera plate, you should be able to maintain a significant balance of light and controlled inclination.
Center columns on these tripods are taller than one of the original travel tripods, which is useful, but they are still fixed with a small -looking lock noob, they really lock the harsh and without any flakes.
You can also get a spiked foot, but they are an optional extra, nor does it seem that peak design contains phone clamps with these tripods, so it will be extra paid. This is understood because these pro tripods are more and more engineered for the use of the phone anyway. If you get a phone mount, it will still slip into the center column for storage. Here, the peak design is trapped with its slightly complex bridge and twin hook release, which is easy when you learn how it works but can be disturbing first.
So this peak design is a sharp tour of Pro Tapodes, but which one is best to get? This is difficult because they are the same in both the size and the price. It is expected that when it is fully sold in November 2025, the standard pro tripod is expected to be sold at $ 899.95, Lighter Pro Light will be $ 799.95 and Pro long will be $ 9999.95. I have not yet seen prices for the UK or Australia.
Personally, I will not go for Pro Light. I can understand this argument – this is a slightly light, cheap alternative to the regular pro model – but it’s not too small and I think I will pay extra for the pro model’s thick legs. However, Pro is long interesting. If I was 6 feet tall and did not like to use the center column, I would go for it. When the pack is packaged, it is definitely long, but all these tripods are too long to fit inside a bag and will be strapped from the outside. In addition, when you did not need extra height when you did not need even more stability, not four, not four, not four, four.
Peak Design Pro Tripai: Key Springs
| Header cell – column 0 | Pro Light | Product | Pro tall |
|---|---|---|---|
Pack length | 48.8 cm | 50.1 cm | 58.1 cm |
Pack | 8.5 cm | 9.3 cm | 9.3 cm |
Maximum height, center column down | 133.2 cm | 138.0 cm | 162.0 cm |
Maximum height, center column up | 162.5 cm | 168.4 cm | 197.4 cm |
Minimum height (low format) | 15.8 cm | 15.9 cm | 17.3 cm |
Weight | 3.74lbs / 1.7kg | 4.19lbs / 1.9kg | 4.4lbs / 2.0 kg |
Maximum pay loads | 15.9 kg | 18.1 kg | 18.1 kg |
Head | Integrated Pro Hall Head | Integrated Pro Hall Head | Integrated Pro Hall Head |
Content | Carbon fiber | Carbon fiber | Carbon fiber |
Parts of the legs | 4 | 4 | 4 |
Peak design Pro Tapid Price and Availability
On July 17, 2025, peak design will start at Kickstarter, but is expected to go on public sales in November 2025. The expected price of Pro Light Tapod is 9979.95, Pro Tapai will be sold for $ 899.99 and Pro long for $ 9999.99.
Telt mode and Pro Leveling Base will be sold separately and we are currently looking forward to pricing information on them, but we have been told that the option is Spacked Fit. Will be sold in 49.95.
Peak Design Pro Tripai: Consider this too
Should I buy a peak design pro tripod?
If buy it …
If not buy it …
How I experienced peak design Pro Tripai
- Operational speed and performance
- Hard and hard
- Hair Head Operation
- The effectiveness of the Advisor
I had only two weeks to try the peak design pro tripods as the loan stock supply was very low and it was shared between many different reviewers. However, I know the original peak design travel tripod very well and I review the tripod as part of my work, so I already had a list I was looking for and expected with these new pro tripods.
I especially wanted to examine the speed and ease of deployment, and it was a pleasure to know that it was as smart as the original travel tripod but faster, thanks to the 4 -section legs and the clamps of the big legs. I also wanted to check whether the brilliant hardship of the original travel tripod has promoted these new, large size, and is in it. I do not remember any other tripod that I have experienced with more tours of them with hardness and lack of leg flakes.
I also wanted to check out how the new pro balls worked. The original was good but quite small and fast. It’s a lot better. Not only does it clam hard and hold heavy loads better, making the camera to pannaming the ultimate hair design shots so easy.
Finally, I spent some time to try the tilt mode and pro -leveling base. The bent mode is so well fixed on the pro balls that they feel like a single (very smooth) unit and the Pro Leveling base took a minute or more to exchange with regular columns but allows you to use your own tripod.
Reviewed the first June 2025
